| Rod Name | Sharpes Lee Wulff Ultimate Exact Co |
| Length (inches) | 70 |
| Length (feet) | 5.8 |
| Line Weight | 5 |
| Number of pieces | 1 |
| Number of tips | 1 |
| Construction | Hex |
| Comments | Rod is 5'10 1/4" @1 5/8 oz. The taper here is an EXACT COPY of that used by Sharpe to roduce the Lee Wulfe Ultimate and has been copied from an original taper sheet (copied) that I have that was signed by Sharpe himself. 0 .080 17.5 .1275 35 .175 52.5 .2225 70 .270 The taper is not at the usual 5" or 6" stations but taken from the rig they used to set up their miller. |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.080 | 0.040 |
| 5 | 0.094 | 0.047 |
| 10 | 0.107 | 0.054 |
| 15 | 0.121 | 0.061 |
| 20 | 0.134 | 0.067 |
| 25 | 0.148 | 0.074 |
| 30 | 0.161 | 0.081 |
| 35 | 0.175 | 0.088 |
| 40 | 0.189 | 0.095 |
| 45 | 0.202 | 0.101 |
| 50 | 0.216 | 0.108 |
| 55 | 0.229 | 0.115 |
| 60 | 0.243 | 0.122 |
| 65 | 0.251 | 0.126 |
| Guide | Location | Size |
|---|---|---|
| 1 | 4.0 | 1.0 |
| 2 | 9.0 | 1.0 |
| 3 | 14.8 | 1.0 |
| 4 | 20.5 | 2.0 |
| 5 | 26.8 | 2.0 |
| 6 | 34.0 | 2.0 |