| Rod Name | Payne 95 6' 3/4 wt |
| Length (inches) | 72 |
| Length (feet) | 6 |
| Line Weight | 3 |
| Number of pieces | 2 |
| Number of tips | 1 |
| Construction | Hex |
| Comments | Here's the Payne 95. I got this from Carlos Santos about three years ago. Carlos measures a rod with the tip of each section = to zero rather than in 5" increments with the rod assembled.The rod was measured over varnish. I've not built this so I have no opinion as to its action. The Payne catalogs only describe it as a 6' DT3 or 4 wt. |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.048 | 0.024 |
| 5 | 0.060 | 0.030 |
| 10 | 0.075 | 0.038 |
| 15 | 0.096 | 0.048 |
| 20 | 0.104 | 0.052 |
| 25 | 0.118 | 0.059 |
| 30 | 0.122 | 0.061 |
| 35 | 0.126 | 0.063 |
| 40 | 0.130 | 0.065 |
| 45 | 0.138 | 0.069 |
| 50 | 0.160 | 0.080 |
| 55 | 0.173 | 0.087 |
| 60 | 0.183 | 0.092 |
| 65 | 0.201 | 0.101 |
| Guide | Location | Size |
|---|