| Rod Name | Orvis Flea 6' 6" |
| Length (inches) | 78 |
| Length (feet) | 6.5 |
| Line Weight | 5 |
| Number of pieces | 2 |
| Number of tips | 1 |
| Construction | Hex |
| Comments | Not sure of length or weight. Sorry to be so long in getting back to you. Got involved with some steelheads and chinooks. A 42 inch chinook will just not be rushed. I miked two Orvis Flea rods in 1970. They tracked each other pretty well. I liked the rods so I built a few. Here are the numbers measured over varnish: The top guide was size 5 and the ferrule was size 10. Just in case anyone else might be interested I'll post this to the list. Bill |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.078 | 0.039 |
| 10 | 0.105 | 0.053 |
| 15 | 0.117 | 0.059 |
| 20 | 0.128 | 0.064 |
| 25 | 0.140 | 0.070 |
| 30 | 0.153 | 0.077 |
| 35 | 0.155 | 0.078 |
| 40 | 0.166 | 0.083 |
| 45 | 0.185 | 0.093 |
| 50 | 0.196 | 0.098 |
| 55 | 0.205 | 0.103 |
| 60 | 0.217 | 0.109 |
| 65 | 0.234 | 0.117 |
| 70 | 0.263 | 0.132 |
| Guide | Location | Size |
|---|