| Rod Name | Fink Bill 7341 4/5 wt 1 Pc Penta |
| Length (inches) | 87 |
| Length (feet) | 7.3 |
| Line Weight | 4 |
| Number of pieces | 1 |
| Number of tips | 1 |
| Construction | Penta |
| Comments | OK - Here is Bill Fink's penta taper. It's a 7'3" 4-5 weight. It is very crisp and accurate a wonderful DF rod. The numbers are the STRIP dimensions ie. the planing form settings. Bill built this as a one piece and I suggest you do the same if you possibly can. Can you do that on a Morgan Mill? Maybe Bill would consider running a two piece taper for the vechicle length or planing form impaired |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.030 | 0.015 |
| 5 | 0.039 | 0.020 |
| 10 | 0.050 | 0.025 |
| 15 | 0.059 | 0.030 |
| 20 | 0.066 | 0.033 |
| 25 | 0.073 | 0.037 |
| 30 | 0.080 | 0.040 |
| 35 | 0.086 | 0.043 |
| 40 | 0.092 | 0.046 |
| 45 | 0.098 | 0.049 |
| 50 | 0.105 | 0.053 |
| 55 | 0.111 | 0.056 |
| 60 | 0.117 | 0.059 |
| 65 | 0.124 | 0.062 |
| 70 | 0.130 | 0.065 |
| 75 | 0.141 | 0.071 |
| Guide | Location | Size |
|---|