Payne 7 -1 Parabolic taper - irish-george
This is a multi-part message in MIME format.
------=_NextPart_000_000D_01C2D6B3.D89F3E00
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I ran into a small problem on the rod pics and should have them later =
this week. But, I do have the taper to post. First, a bit of =
background info: the measurements are taken from a rod, not a blank, so =
I took more measurements because I couldn't always keep them on a =
consistent spacing. I did NOT deduct anything for the varnish (which is =
glossy and like new, probably is about 0.003". All spacings are from =
the small end of that particular rod section. Since many ask about =
guide spacings, I'll give them at the end of this email. In some cases =
a measurement was taken under a guide IF it was thought it could be done =
with any sort of accuracy and such measurements are noted. These are =
flat-to-flat measurements of a hexagonal rod.
Anyway, here goes:
TIP
3/4" 0.07360
2" 0.07925
4" 0.09070
6" 0.09780
8" 0.10230
10" 0.10120 (under guide - checked and rechecked)
12" 0.11055
14" 0.11570
16" 0.12280 (under guide)
18" 0.12530
20" 0.12890
22" 0.13320 (under guide)
24" 0.14310
26" 0.15070
28" 0.15260
30" 0.15580
32" 0.16135
34" 0.16165
36" 0.17550
38" 0.17915
40" 0.18185
42" 0.17905 (at guide wrap edge - checked and rechecked)
Butt
2-1/2" 0.20915
4" 0.21715
6" 0.21845
8" 0.21720 (checked and rechecked)
10" 0.22290
12" 0.23680 (under guide)
14" 0.24085
16" 0.24900
18" 0.25855
20" 0.26595
22" 0.27290
24" 0.28425
26" 0.29600
28" 0.30255
Other data some of you may care about:
Tip section length is 45-1/4"
Butt section length is 39-3/8"
Tip guides are at: 4-1/2", 10-1/8", 16-1/8", 22-1/8", 28-5/8", 35-3/8", =
42-1/2"
Butt guides are at: 2-1/2", 12-1/16"
Grip length is 5-9/16"
Reel seat length is 3-1/2"
If anyone builds one, send me a picture!
------=_NextPart_000_000D_01C2D6B3.D89F3E00
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable