para 11 - timothy troester

this is copied from the archives.  timothy

Date: Wed Oct 20 9:26:30 1999 
From: "George M. Aldrich"  
Subject: Re: PHY Parabolic #11 

        charset="iso-8859-1"

O.K., here are the dimensions for the Paul H, Young
#11 parabolic 3 - =
pc. rod, at 9'-4". Measurements are taken from the
bare cane at the tip =
top, in the noted measurements. Note that from the 35"
mark, to the 37" =
mark, this is the distance from 35", to the edge of
the tip male ferrule =
serration. I gave this dimension, because it's where
the cane enters the =
ferrule. However, the 41.5" mark is taken from the 35"
mark, in a 6.5' =
jump. this is due to the whole ferrule, and a guide
preventing a =
measurement at 5" increments.

Tip top =3D .0840
5" =3D .0914 (5")
5" =3D .1143 (10")
5" =3D .1347 (15")
5" =3D .1523 (20")
5" =3D .1631 (25")
5" =3D .1854 (30")
5" =3D .2123 (35")
2" =3D .2221 (37") (at end of serrations of male, tip
ferrule)****
6.5" =3D .2120 (41.5")
3.5" =3D .2199 (45")
6" =3D .2428 (51")
6" =3D ..2560 (57")
6" =3D .2704 (63")
5" =3D .2793 (68")
5" =3D .3002 (73")
6" =3D .3203 (79")
6.5" =3D .3231 (85.5")
5" =3D .3506 (90.5")
5" =3D ..3625 (100.5")
5" =3D ..3625 (105.5")

*** Note: This dimension bothers me, and I will
re-check. I checked =
again this morning, and they are accurate !

GMA


I forgot to add that the grip to end of the reel seat
is =
10.75"=20
long, and there is no winding check.


=====
"Gooda' morning mister bear"

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/