Gillum Tapers - Dennishigham

--part1_83.f7cdf33.2e12d391_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Here are the #'s for the Gillum 9', 7wt Light Salmon. The label on the tube 
reads Lt. Salmon....9'.....7 1/2oz.
measured over varnish
tip 1.25" = .074, 5" = .090, 10" = .103, 15" = .114, 20" = .124, 25" = .148, 
30" = .163, 34.25" = .168
mid 38" = .186, 40" = .195, 45" = .207, 50" = .219, 55" = .240, 60" = .262, 
65" = .271, 69.75" = .282
butt 75" = .288, 80" = .292, 85" = .314, 90" = .324, 95" = .340, 97" = .382 
grip

Guides @ 4 1/4, 9 3/4, 16 1/4, 23 13/16, 31 7/8, 39, 46, 53, 60 1/2, 68 1/8, 
74 1/4, 81 3/4

Yes, there is a large drop over the mid/tip ferrule.
this casts a 5, 6, and 7 well but is listed as a 7wt.

Dennis

--part1_83.f7cdf33.2e12d391_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

Here are the #'s for the Gillum 9',=
 7wt Light Salmon. The label on the tube reads Lt. Salmon....9'.....7 1/2oz.=


measured over varnish

tip 1.25" =3D .074, 5" =3D .090, 10" =3D .103, 15" =3D .114, 20" =3D .124, 2=
5" =3D .148, 30" =3D .163, 34.25" =3D .168

mid 38" =3D .186, 40" =3D .195, 45" =3D .207, 50" =3D .219, 55" =3D .240, 60=
" =3D .262, 65" =3D .271, 69.75" =3D .282

butt 75" =3D .288, 80" =3D .292, 85" =3D .314, 90" =3D .324, 95" =3D .340, 9=
7" =3D .382 grip



Guides @ 4 1/4, 9 3/4, 16 1/4, 23 13/16, 31 7/8, 39, 46, 53, 60 1/2, 68 1/8,=
 74 1/4, 81 3/4



Yes, there is a large drop over the mid/tip ferrule.

this casts a 5, 6, and 7 well but is listed as a 7wt.



Dennis

--part1_83.f7cdf33.2e12d391_boundary--