| Rod Name | Waara 12.5 Spey |
| Length (inches) | 150 |
| Length (feet) | 12.5 |
| Line Weight | 6 |
| Number of pieces | 3 |
| Number of tips | 1 |
| Construction | Spey |
| Comments | 120-410 125-.422 130-430 135-.430. The 12'6" Bill Waara spey rod is in The Planing Form May/June 1997. Its on my "to do someday" list. This is how it is shown there I agree with Chris that there was dimension missing from the taper in TPF Here is what Chris came up with. It is a slow smooth classic spey taper I agree with Chris that there was dimension missing from the taper in TPF. >Here is what Chris came up with. It is a slow smooth classic spey taper >0- .078 >5- .102 >10-.118 >15-.136 >20-.154 >25-.170 |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Ferrule 2 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.078 | 0.039 |
| 5 | 0.102 | 0.051 |
| 10 | 0.118 | 0.059 |
| 15 | 0.136 | 0.068 |
| 20 | 0.154 | 0.077 |
| 25 | 0.170 | 0.085 |
| 30 | 0.184 | 0.092 |
| 35 | 0.200 | 0.100 |
| 40 | 0.216 | 0.108 |
| 45 | 0.230 | 0.115 |
| 50 | 0.244 | 0.122 |
| 55 | 0.258 | 0.129 |
| 60 | 0.272 | 0.136 |
| 65 | 0.286 | 0.143 |
| 70 | 0.300 | 0.150 |
| 75 | 0.312 | 0.156 |
| 80 | 0.324 | 0.162 |
| 85 | 0.336 | 0.168 |
| 90 | 0.348 | 0.174 |
| 95 | 0.358 | 0.179 |
| 100 | 0.368 | 0.184 |
| 105 | 0.378 | 0.189 |
| 110 | 0.388 | 0.194 |
| 115 | 0.398 | 0.199 |
| Guide | Location | Size |
|---|