| Rod Name | Nunley 6' 9" 2 wt |
| Length (inches) | 81 |
| Length (feet) | 6.8 |
| Line Weight | 2 |
| Number of pieces | 2 |
| Number of tips | 1 |
| Construction | Hex |
| Comments | After building and trashing 3 rods trying to get what I wanted here is y latest taper. I just finished the first "good" rod on this taper and it casts like a dream. It is a DRY FLY rod so if you like a soft tip and a strong butt give it a try when your no so busy. If you don't fab your own ferrules you could probably get by with a 10/64. The Stress curve looks a little strange on paper but it works when you put a 2 DT line and an Adams on it. |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 9/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.046 | 0.023 |
| 5 | 0.056 | 0.028 |
| 10 | 0.073 | 0.037 |
| 15 | 0.087 | 0.044 |
| 20 | 0.105 | 0.053 |
| 25 | 0.119 | 0.060 |
| 30 | 0.126 | 0.063 |
| 35 | 0.137 | 0.069 |
| 40 | 0.145 | 0.073 |
| 45 | 0.162 | 0.081 |
| 50 | 0.180 | 0.090 |
| 55 | 0.203 | 0.102 |
| 60 | 0.221 | 0.111 |
| 65 | 0.241 | 0.121 |
| 70 | 0.262 | 0.131 |
| Guide | Location | Size |
|---|