dickerson 761510 taper - Drdak

--part1_3e.33f9d457.2c78eb0a_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

ok; here's the taper for all the guys who requested it; remember, this is 
taken over varnish, so compensatory deductions need to be made:  tip:  .5"  .060, 
 5"  .073,  10"  .090,  15"  .115,  20"  .132;  25"  .141;  28.5".155;   mid: 
 1.5"  .162;  5"  .177;  10"  .191;  15"  .203;  20"  .218;  25"  .222;  28"  
.234;  butt:  1.5"  .236;  5"  .248;  10"  .259; 15"  .268;  20"  .345;  cork 
and seat  9"; cork  5.5";  obviously measured with all the hardware on, so 
some of the taper will have to be guesswork;  good luck to all          david h

--part1_3e.33f9d457.2c78eb0a_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

ok; here's the taper for all the guys who requested it=
; remember, this is taken over varnish, so compensatory deductions need to b=
e made:  tip:  .5"  .060,  5"  .073,  10" =
; .090,  15"  .115,  20"  .132;  25"  .141;&nb=
sp; 28.5".155;   mid:  1.5"  .162;  5"  .177;&=
nbsp; 10"  .191;  15"  .203;  20"  .218;  25"&=
nbsp; .222;  28"  .234;  butt:  1.5"  .236;  5=
"  .248;  10"  .259; 15"  .268;  20"  .345;&nb=
sp; cork and seat  9"; cork  5.5";  obviously measured with a=
ll the hardware on, so some of the taper will have to be guesswork;  go=
od luck to all          david h=


--part1_3e.33f9d457.2c78eb0a_boundary--